Specializing in high-power regulated power supplies for 15 years, our production factory spans over 10,000 square meters. We are committed to providing reliable power electronics solutions and outstanding service to global customers.

Product Instructions

• 1 Before powering on, check the switch power supply for any potential damage during transportation, such as loose screws, abnormal appearance, dislocated terminals, or dampness. Address any issues promptly.
• 2 The local power switch controls the internal auxiliary power supply. For safety, please add an external air switch at the power input terminal. Correctly connect the ground and input wires according to the rear panel label.
• 3 The cooling fan operates based on temperature control. It starts running when the internal temperature exceeds the threshold point. Ensure that air inlets and outlets remain completely clear.
• 4 If internal temperatures reach the overheat threshold, the machine will shut down automatically for protection and resume operation once it cools down.
• 5 Ensure that ambient air is free from abnormal dust, acid, corrosive gases, or extreme vibration. Avoid direct exposure to rain or sunlight.
• 6 Perform regular dust removal (e.g., using dry compressed air) to extend service life. Do not open the casing or risk damaging internal components due to high internal voltage.
• 7 Store idle equipment in a dry, ventilated area. If stored for over 6 months, power on the device and run it for at least 30 minutes.
• 8 Warning: Only connect load equipment to the power supply once testing confirms normal, error-free operation.
• 9 In case of malfunction, immediately switch off power. Check all external connections and settings. Do not attempt unauthorized repairs due to dangerous high-voltage hazards; consult professional technical support.