1
Before powering on, check the stored and transported switch power supply. Inspect for any damage during transportation, such as loose screws, abnormal appearance, shaken power cords or terminals, and dampness. Handle any issues in a timely manner.
2
The local power switch controls the internal auxiliary power supply. For safety, please add an air switch to the power input terminal. Connect the ground wire and input power wire according to the rear panel label. Confirm the input power voltage matches the specifications.
3
The cooling fan is temperature-controlled and starts when the internal temperature exceeds the threshold. Fan speed varies with output voltage and current. Keep the fan inlet and outlet clear of obstructions.
4
If the internal temperature reaches the overheat shutdown threshold, the machine will automatically stop working to prevent damage, and will resume once it cools down.
5
Ensure the operating environment is free of excessive dust, acid, corrosive gases, severe vibrations, moisture, and direct sunlight.
6
Perform regular dust removal (e.g., using dry compressed air) to extend product life. Do not open the casing without authorization due to internal high voltage.
7
If idle for over 6 months, store in a dry, ventilated room and power on for at least half an hour before use.
8
Warning: Only connect the load equipment after confirming the power-on test is normal and error-free.
9
In case of malfunction, cut off the power switch immediately. Check internal and external connections, screws, and knob positions. Due to high voltage, do not attempt to repair the equipment yourself. Please notify professional technicians promptly to resolve any issues.
Q: Is there overvoltage, overcurrent, overheating, or short circuit protection?
A: Yes, the system includes integrated overvoltage, overcurrent, overheating, and short circuit protection.
Q: Is there reverse protection?
A: Adding reverse protection is optional and can be customized.
Q: Can it be used at full power for a long time?
A: No, it is recommended to use the power supply with excess capacity. Long-term continuous operations should be kept below 80% load capacity.
Q: Is it convenient to adjust voltage and current?
A: Yes, it is very convenient. The voltage and current values can be easily adjusted using the dual knobs on the panel.
Q: Is the high-power power supply isolated?
A: Yes, this is designed as a fully isolated power supply.
Q: What is the voltage regulation range?
A: The voltage regulation starts from 1V.