1
Before powering on, check the stored and transported switch power supply. Inspect for any damage during transportation, such as whether screws are loose, the appearance is abnormal, power cords and terminals are shaken off, or if they are damp. If any issues are found, handle them in a timely manner.
2
The local power switch controls the auxiliary power supply inside the machine. For safety reasons, please add an air switch to the power input terminal to control the power input. Connect the ground wire and input power wire according to the label on the rear panel. Confirm they are connected correctly and verify if the input voltage is consistent with the voltage indicated in the manual.
3
The cooling fan is temperature controlled. The fan starts when the internal temperature exceeds the designated temperature control point. Fan speed varies with the output voltage and current under normal conditions. Do not block the inlet and outlet of the fan during operation.
4
When the temperature inside the machine reaches the threshold for overheating shutdown, the machine will automatically stop working to prevent damage. Once the temperature drops, it will automatically resume work.
5
Avoid using the equipment in environments containing dust, acid, corrosive gases, or substances exceeding normal levels. Direct sunlight, severe vibrations, bumps, and rain should be avoided as much as possible.
6
Regularly carry out dust removal work to improve the service life and reliability of the equipment (dry compressed air can be used for dust removal). Do not open the casing to prevent damage to internal components and avoid high-voltage risks.
7
When the power equipment is idle for a long time, store it in a dry and ventilated room. If the storage time exceeds 6 months, power on and operate the equipment for more than half an hour.
8
Warning: Only connect to the powered load equipment when the power-on test is normal and error-free.
9
Handling malfunctions: If abnormal operation is found, immediately turn off the power switch, check the internal/external connections for correctness, and check for loose screws. Ensure all switches and knobs are in the correct positions. Do not unscrew the casing or repair it without professional knowledge to prevent electric shock accidents. Contact professional technicians promptly for assistance.
Frequently Asked Questions
QIs there overvoltage, overcurrent, overheating, or short circuit protection?
Yes, the power supply includes comprehensive protection mechanisms against overvoltage, overcurrent, overheating, and short circuits.
QIs reverse polarity protection available?
Yes, reverse protection can be integrated as an optional feature. Please specify this requirement when ordering.
QCan this power supply operate at full power continuously?
For long-term continuous operation, it is recommended to run the power supply below 80% capacity to ensure optimal stability and prevent premature wear.
QIs it convenient to adjust the output voltage and current?
Yes, the unit features dual knobs that allow for easy, independent adjustment of voltage and current settings.
QAre these high-power power supplies isolated?
Yes, our high-power power supplies are fully isolated designs to ensure safe operation.
QWhat is the starting voltage regulation range?
The voltage regulation range starts from 1V.
Voltmat Power
